One of the most important elements in any vehicle is the brakes. More specifically, given its sheer mass, the system used in rollers must dissipate a large amount of energy in the form of heat, through long work days and tough working conditions. To be effective, the braking system must be well designed, properly used and maintained as required. It is one of the elements we care the most about. The latest braking system designed by CORINSA is fully hydraulic and unifies all the machinery systems under the same type of energy. An independent dual circuit braking coordinates with the parking brake, thus preventing the machine from starting unless sufficient cumulative energy is available to allow the brakes to operate independently from the engine. Also the oil in the braking system is constantly renewed to prevent overheating and degradation. Conceptually, the machine remains locked as long as operating conditions are not safe for the operator or the environment, and locks again in case of system failure or breakdown.
Hydraulic pump, dual circuit service brakes, nitrogen pressure reservoir and brake calipers gripping up to 0.5m-diameter ventilated discs.
Parking and emergency brakes with independent circuit to brake and lock transmission using two large negative action calipers acting on a 0.5m-diameter disc.
The best braking system currently available at a reduced maintenance cost. Brake pad replacement and monitoring of hydraulic oil.